If you have a fire or water emergency, please call us now at (310) 456-2135

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Tips for Handling Water Damaged Electronics

1/9/2020 (Permalink)

Electronics can get damaged during water damage or flood If your devices have been submerged in water, you need to have them examined by a professional to determine the extent of the electronic damage.

If your building was flooded, whether by a storm in Malibu/Topanga Canyon/Pacific Palisades or a burst pipe, then you will likely be dealing with quite a bit of damage. Along with the structure of the building and the furniture inside, your equipment can be affected as well. If you have flooded electronics, it is important to handle them cautiously to prevent further damage. The following tips can help.

  1. Remove Them From the Water Immediately

It is probably obvious that the first thing you should do is remove your electronics from the water. The longer they are submerged, the more damage they are likely to suffer. Quickly relocate them to a dry area to prevent additional problems from moisture.

  1. Wipe Down the Exterior

While you are most likely more concerned with the inside of your flooded electronics, you should not neglect to care for the exterior. Use a towel or cloth to thoroughly dry the outside of any affected items to prevent corrosion. This also keeps any water on the outside from entering the device.

  1. Do Not Turn Them On

It can be tempting to check the state of the electronic damage by turning on your equipment, but this is not a good idea. Even if the outside is dry and it looks like it might be fine, moisture may be hiding on the inside. If you turn on your device before it has completely dried, this can cause even more damage that may make repairs impossible.

  1. Have Them Inspected by a Professional

If your devices have been submerged in water, you need to have them examined by a professional to determine the extent of the electronic damage. In some cases, they may be able to repair them, saving you from the cost and frustration of having to purchase a replacement.
Flooded electronics are just one of several problems caused by water damage If you need to have work done on your building, a cleanup restoration service can do this for you. They can have your building back to its previous condition quickly and can salvage many of your damaged belongings.

Other News

View Recent Posts